Bra liquid silicone-HY-9465

$42.00

Bra liquid silicone is not only a high-grade material and environmentally friendly material for women’s silicone bras, it can also be used to make mannequins, silicone artificial skins, silicone mask ears, silicone artificial human organs, artificial human silicone limbs, prosthetics, artificial props, and adult sex products. And other flexible silicone rubber products.

SKU: PSD001-HYF663-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1 分类:

描述

Brief introduction of bra liquid silicone:

Bra liquid silicone is a kind of addition molding liquid silicone, using platinum catalyst environmental protection material, so it is an environmentally friendly non-toxic silicone, also known as bra silicone, human body silicone rubber. The ratio of A and B two components, the mixing ratio is 1:1, it can be cured at room temperature or heated. In recent years, silicone bras and silicone bras have become more and more popular, thanks to the obvious advantages of silicone bras that are more environmentally friendly, more breathable, and healthier than sponge bras.

Uses of bra liquid silicone:

Bra liquid silicone is not only a high-grade material and environmentally friendly material for women’s silicone bras, but it can also be used to make scar stickers, Velcro stickers, and anti-fever stickers.

Characteristics of bra liquid silicone:

(1) Soft touch, no deformation, and good resilience.

(2) It has physiological inertness, odorless, good air permeability, and low linear contraction rate.

(3) Convenient operation and easy perfusion; it can be cured at room temperature or heated.

(4) It is not limited by the thickness of the product, and the temperature resistance can be used for a long time at -65℃ -200℃ and maintain its soft and elastic properties.

(5) Convenient operation and easy perfusion; passed SGS, RoSH, FDA environmentally friendly and non-toxic food-level certification.

How to use bra liquid silicone:

A and B components are mixed evenly at 1:1, and can be poured after vacuum degassing. The operating time depends on the temperature, generally about 30 minutes, the curing time (room temperature) is 2-3 hours, and the heating is 80-120° C can be vulcanized within tens of minutes. It can be matched with other colors such as red and yellow according to user requirements.

Precautions for bra liquid silicone:

1. Since the addition-molded silica gel is easy to react, it is necessary to clean everything that has been used with the condensation-type silica gel when the addition-molded silica gel is used to prevent the gel from not curing.

2. Before the test, do not add color or powder to the addition molding at will, so as to avoid the phenomenon of catalyst reaction and non-curing of the glue.

3. When mixing A and B compounds, the ingredients should be strictly in accordance with the proportioning requirements. The proportioning is inaccurate and the hardness will change.

4. This product is a platinum catalyst. Water, impurities, organotin catalysts, acids, alkalis and other organic substances containing sulfur, phosphorus, and nitrogen can affect the curing of the glue. Do not mix or contact these substances during use.

Regular packaging of bra liquid silicone:

40 kg/set (20 kg for component A + 20 kg for component B)
400 kg/set (200 kg for component A + 200 kg for component B)

Bra liquid silicone-HY-9465

其他信息

Type

HY-9405

Hardness(Ao)

36.6

Viscosity(mPa.s)

A 850:B 700

Curing time(h)

3-5

Density(g/cm³)

1.12

Elongation(%)

480

Tear strength(KN/m)

10

Tensile strength(Mpa)

5

Mixing weight ratio of components A&B

1:1

评价

目前还没有评价

成为第一个“Bra liquid silicone-HY-9465” 的评价者

您的电子邮箱地址不会被公开。

滚动到顶部