Prosthetic milk liquid silicone-HY-E600

$42.00

Prosthetic milk liquid silica gel is a kind of food-grade silica gel specially used to produce silicone prosthetic milk, silicone fake milk, etc., which is close to the human body shape, colorless or skin-colored gel-like liquid. It can also be used to produce mannequin shapes, imitation human organs, and human faces. , Human prostheses, adult sex products, male and female sex organs, artificial silicone breast pads, etc.

SKU: PSD001-HYF663-1-1-1-1-1-1-1-1-1-1-1-1-1-1 分类:

描述

Introduction of liquid silicone for prosthetic milk:

Prosthetic milk liquid silicone, also known as prosthetic milk silicone, breast silicone, fake milk silicone, human body silicone and solid silicone, is a kind of addition-molded human body silicone and environmentally friendly silicone. It is composed of A and B two-component flowable liquid glue, which is not limited by the thickness of the product. It can be cured at room temperature or quickly cured by heating.

Application of liquid silicone for breast implants:

Prosthetic milk liquid silicone is a kind of food-grade silica gel that is specially used to produce silicone prosthetic milk, silicone fake milk, etc., which is close to the human body shape, colorless or skin-colored gel-like liquid. It can also be used to produce mannequin shapes, imitation human organs, and human faces. , Human prostheses, adult sex products, male and female sex organs, artificial silicone breast pads, patches and other products.

Performance characteristics of liquid silicone for breast implants:

1. It has the advantages of soft touch, no deformation, and durability. The silicone prosthesis made out is very washable;
2. The temperature resistance is -65℃ -200℃, and it has passed SGS, RoSH, FDA environmental protection and non-toxic certification;
3. It has excellent electrical properties and chemical stability, water resistance, ozone resistance, and weathering resistance;
4. Good air permeability, non-corrosive, low linear shrinkage, no deformation, and easy operation;
5. It is physiologically inert, non-toxic and tasteless, and can be cured at room temperature or heated to form.

How to use liquid silicone for breast implants:

Mix components A and B evenly at a ratio of 1:1, and then pour after vacuum degassing. The operating time depends on the temperature (0.5-3)H, the curing time (room temperature) 3-8H, heating 80-120° C can be vulcanized within tens of minutes. If the room temperature quick-drying silica gel is used, the operating time is less than 20 minutes, and the curing time is 1 hour. The hardness, color, viscosity, etc. can be adjusted according to user requirements.

Precautions for breast implant liquid silicone:
1. Since addition molding silicone is easy to react, everything that has been condensed silicone rubber should be cleaned before using addition molding to avoid uncuring.
2. Do not add color or powder to the addition molded silicone rubber before the test, so as to avoid the phenomenon of catalyst reaction and non-curing of the rubber.
3. When mixing A and B compounds, the ingredients should be strictly in accordance with the proportioning requirements. If the proportioning is inaccurate, the hardness will change.
4. This product is a platinum catalyst. Water, impurities, organotin catalysts, acids, alkalis and other organic substances containing sulfur, phosphorus, and nitrogen can affect the curing of the glue. Do not mix or contact these substances during use.

Prosthetic milk liquid silicone-HY-E600

其他信息

Type

HY-9300

Hardness(Ao)

5±2

Viscosity(mPa.s)

3000±1500

Curing time(h)

3-5

Density(g/cm³)

1.12

Elongation(%)

480

Tear strength(KN/m)

10

Tensile strength(Mpa)

5

Mixing weight ratio of components A&B

1:1

评价

目前还没有评价

成为第一个“Prosthetic milk liquid silicone-HY-E600” 的评价者

您的电子邮箱地址不会被公开。

滚动到顶部